DAYTON 6A194C DC Gearmotor
Brand : DAYTON
Manufacturer Part Number : 6A194C
Shaft Orientation: Parallel
Operating Volta : 90V DC
Full Load Current : 0.53 A
Motor TypePermanent Magnet DC
Motor Enclosure : Totally Enclosed Nonventilated
Nameplate Speed : 8.7 RPM
Maximum Torque : 250 in-lb
Input Horsepower : 1/20 hp
Overhung Load Capacity : 150 ft-lb
Rotation : CW/CCW
Base to Center of Shaft : 3.5 in
Mounting Orientation : Any Angle
Thermal Protection : None
Maximum Ambient Temperature : 40 °C
Gear Ratio : 208:1
Gear TypeHelical : Spur
Output Shaft Diameter : 5/8 in
Output Shaft Length : 1-1/2 in
Keyway Width : 3/16 in
Keyway Depth : 1 in
Replaceable Motor Brushes : Yes
Bearing Type : Ball on Motor; Needle Roller and Thrust Balls on Case
Seal Type : Spring Loaded Lip Type on Input and Output Shaft
Lubrication : Permanent Heavy Fluid Gear Oil
Housing Material : Aluminum
Mount Hole Center-to-Center Width : 4 in
Mount Hole Center-to-Center Length : 1.5 in
Overall Length : 9.75 in
Length Less Shaft : 8.25 in
Overall Height : 5.13 in
Standards : C-UL Recognized; UL Recognized
Country of Origin : USA (subject to change)