E-T-A Circuit Protection
Model : AD-TX-EM01
E-T-A Circuit Protection and Control AD-TX-EM01 Passive Power Supply Module,E-T-A ESX10-T Series,Line + 0 V,W/O Protection,50A
Overview
E-T-A’s ESX10-T electronic circuit protector is only 12.5 mm wide and selectively protects all DC 24 V load circuits, thereby increasing the uptime of machines and systems. This is achieved by a combination of active electronic current limitation in the event of a short circuit and overload disconnection typically from 1.1 times rated current. The ESX10-T responds faster than frequently used DC 24 V switch mode power supplies without tripping fast and thus prevents disastrous voltage dips of the supply. It works with a single trip curve for all loads. Even capacitive loads up to 75,000 μF can be handled very easily. Besides fixed current ratings from 0.5 A to 12 A, adjustable current rating versions are also available. The integral fail-safe element (fuse) is adjusted to the circuit protector’s rated current and can thus very easily be synchronised with the wired cable cross section. This makes planning much easier. Features l Track-mountable l Active linear current limitation l Capacitive loads up to 75,000 μF l ESX10-TA/-TB: fixed current ratings 0.5 A…12 A l ESX10-TD: adjustable current ratings, e.g. [0,5 A / 1 A / 2 A]; [2 A / 4 A / 6 A]; [6 A / 8 A / 10 A] l Approvals: UL, CSA, DNV GL l OPTION: Control inputs, signalling l OPTION: ATEX and IECEx-approval