LIMATHERM LPI -01 HEAD MOUNTED DIGITAL DISPLAY
LPI-01 display is an integral element of temperature sensor, available also as a separate component. It enables local indication of temperature measured directly in connection head. It has 3 configuration keys at the front panel.
– for temperature sensors with connection head type DANAWwin
– 4-digit LED display, height 9,5 mm
– display screen size: 30x14 mm
– programmable via keypad
– set parameters: zero, span, decimal point
– Ingress Protection Rating of a housing IP20
– degree displaying: C°, F°, K, %, 4s values, 2s degrees
– cooperation with HART Communication Protocol
Input/output signal : 4÷20 mA
Power supply : 10÷30V DC
Range of programming / displaying : -1999÷9999
Voltage drop : 3,3V at 4 mA; 3,7V at 20 mA
Set points : zero 4 mA, span 20 mA
Accuracy : 0,1% range and +/- 1 digit
Temperature drift : 20 ppm/°C for temperature 20°C
Electrical connection : 2-wire <1 mm2
Dimensions [mm] : ø64 x 19
Operating conditions : ambient temperature: -20÷80°C humidity: 25 to 95% RH non-condensing storage temperature: -30÷80°C