BALLUFF BAE SA-OH-061-UA-S75G
Principle of operation : Signal amplifier
Operating principle : Photoelectric
Principle of optical operation : depends on sensor head
Ambient temperature : -5...55 °C
Analog output : Analog, voltage 0?10 V
Adjuster : Jog switch;Key (1x)
Connection : Connector, M8x1-Male, 4-pin
Connection 1 : M8x1-Male, 4-pin
Connection 2 : Sensor BOH: M8x1-Male, 3-pin
Connector design : M8x1/M8x1
Dimension : 12 x 40.1 x 80.5 mm
Display : OLED Display
supply voltage - LED green
Signal - LED YE
Alarm function - LED RD
Sync - LED orange
Housing material : PC
PA 12
Interface : Analog, voltage 0?10 V
IP rating : IP54
Material : PC;PA 12
Mission Time : 10 a
Mounting part : DIN EN50045 rail 15 mm;DIN EN-50022 rail 35 mm;Screw M3 (2x)
MTTF (40 °C) : 44 a
Operating voltage max. DC 01 : 30.0 V
Operating voltage Ub : 15...30 VDC
Photoelectric sensing principle : Clocked
Power indicator : LED green
Range : depends on sensor head
Rated operating voltage Ue : 24 VDC
Rated operating voltage Ue DC : 24 V
Setting : Auto-Synch
Contrast of the OLED display
Factory setting (Reset)
Teach stat./dyn./man.
Synchronization on/off
Read direction of the OLED display
Gain
Style Housing : block style
Style : Square;Straight connection
Switching frequency : 1000 Hz 8 kHz (Superfast Mode)
Scope of delivery : Holder (1x)
Approval/Conformity : CE, WEEE, cULus, UKCA